Board View 
X
 
Wiggle Box Linear Board Edger 
X
Infeed Table  
X
 
Scan Belt 
X
 
Infeed 
X
 
Saws Detail Infeed 
X
 
Outfeed 
X
 
Saws Detail Outfeed 
X
 
Tailer 
X
 
Wiggle Box Lineal Board Edger - Comact:
 
Wiggle Box Linear Board Edger
  • Lineal (linear) board edger feed speeds to 1200 feet per minute
  • Piece counts to 55 pieces per minute on 10' lumber
  • Available with or without top reman head
  • Available with up to 5 saws
  • Lineal scan edger optimizer
  • Improved lumber recovery
More ...
 
Infeed Table
  • Lift skids and hook stops singulate the flitches into the infeed table
  • Drop chains position the flitch horns to the linebar
  • The drop chains and pressrolls lower, allowing the rollcase to feed the flitch to the scan belt
More ...
 
Scan Belt
  • The flitches are scanned on the scan belt with laser/camera profiling scanners
  • Lineal (linear) edger optimizer
  • The scan data is optimized to provide the highest value edging solution for each flitch
More ...
 
Infeed
  • Chain bed and pressrolls hold the flitch stable while feeding it through the lineal (linear) board edger
  • Optional top reman head
More ...
 
Saws Detail Infeed
  • The lineal (linear) board edger "edges" the flitches based on the optimum solution from the scanner
  • The saw box rotates to skew the saws based on the angle of the cut line
  • The saws slew on the arbor during the cut as required to edge the flitch
  • The infeed and outfeed pressrolls are sequenced down on the flitch to hold it in position
More ...
 
Outfeed
The infeed and outfeed pressrolls are sequenced down on the flitch to hold it in position
More ...
 
Saws Detail Outfeed
  • The lineal (linear) board edger "edges" the flitches based on the optimum solution from the scanner
  • The saw box rotates to skew the saws based on the angle of the cut line
  • The saws slew on the arbor during the cut as required to edge the flitch
  • The infeed and outfeed pressrolls are sequenced down on the flitch to hold it in position
More ...
 
Tailer
  • The tailer fingers shift with linear positioners to the center of the sawn board(s)
  • Tailings fall into a waste conveyor below
More ...