TBL2 Curve Sawing Gang Edger 
X
Scan Conveyor 
X
 
Lineal Infeed 
X
 
Saws Infeed 
X
 
Outfeed 
X
 
Plan View 
X
 
TBL2 Curve Sawing Gang Edger - Comact:
 
TBL2 Curve Sawing Gang Edger
  • Saws are stationary throughout the curve sawing process
  • Minimum risk of saw and guide damage
  • Controls curve of the cant from the beginning to the end
  • Four foot gap required for maximum throughput in random lengths
  • Stud mill operation with three foot gap at 600 FPM
  • Automatic positioning of the cant during the process
  • Improved lumber recovery
More ...
 
Scan Conveyor
  • True-shape optical scanners
  • Cants are scanned on the infeed conveyor
  • Optimum solution for the cant is determined
  • Curve Sawing and straight sawing
More ...
 
Lineal Infeed
  • Infeed lineal table positions the cant to the saws
  • Straight sawing, curve sawing and controlled “S” sawing
More ...
 
Saws Infeed
The saws are fixed and the cant is guided around the saws to follow the curved sawing pattern determined by the optimizer.
More ...
 
Outfeed
  • Outfeed table continues the cant through its curvature path
  • Eleven independent bottom outfeed fingers
  • Bottom fingers are raised to support boards and lowered to drop tailings
  • Side fingers provide support for wider boards
  • Shifting outfeed belt to drop tailings of different lengths
More ...
 
Plan View
  • Infeed lineal table positions the cant to the saws
  • Straight sawing, curve sawing and controlled "S" sawing
  • Outfeed table continues the cant through its curvature path
  • Eleven independent bottom outfeed fingers
  • Bottom fingers are raised to support boards and lowered to drop tailings
  • Side fingers provide support for wider boards
  • Shifting outfeed belt to drop tailings of different lengths
More ...
 ©International Online Expos Inc. 2021Terms & ConditionsPrivacyContact Us